Firmware Collection & Gfx – Singapore

Last Updated: 29.06.2022 Overview< /p>

Change in the wide variety of frames that may be saved in a unmarried folder

・The most wide variety of frames that may be stored in a single folder will be changed from 9,999 to 999 with V.2.20 or later.

If you are the usage of a macOS computer to procedure recorded documents within the SDXC memory card, ensure to follow the system underneath before upgrading the firmware.

Follow the commands in “II-2. If the usage of an SDXC memory card with current files or one that has no longer been currently formatted:” within the article titled “Important notice for clients processing FUJIFILM virtual digicam files using macOS” that turned into posted on Feb. 2 on this net website after which layout the SDXC memory card earlier than using it.NotesPlease examine this update after fresh this web page.

  • In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
  • In case of Mac (Safari / Google Chrome), preserve down the “Command” key and “R” key.
  • In case of Mac (FireFox), keep down the “Command”, “Shift” and “R” keys at same time.

The firmware improve isn’t always required if its model is present day.

  • Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” beneath to test the firmware model.

Please use your digicam and lens with the latest model of firmware.

  • If you don’t use them with the trendy model, you could now not experience their complete overall performance. Check the modern firmware model from the hyperlink under.

Firmware Detail of the firmware replace

Revised specification from Ver.2.30 to Ver.2.40FUJINON lens, XF150-600mmF5.6-8 R LM OIS WR has been to be had.The accuracy of AF characteristic has been improved at manual attention mode using “One-Push AF”.Other minor insects were fixed.

Revised specification from Ver.2.20 to Ver.2.30

Regarding the detail, download the “X-S10 New Features Guide” from our website.

New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, ArabicXLR microphone adapter* has been supported. As a result, [XLR MIC ADAPTER SETTING] options have been brought below the [AUDIO SETTING] each in the film menu and in [MOVIE SETTING] inside the photo menu in addition to [4ch AUDIO PLAYBACK] option has been added below [SOUND SETTING] inside the setup menu.

*TEAC TASCAM CA-XLR2d-F” XLR microphone adapters has been supported.The firmware insects had been constant, which hardly ever prompted that the Bluetooth paired tool might now not be registered successfully or that the digital camera could no longer switch on after paired tool become registered.

Revised specification from Ver.2.10/2.11 to Ver.2.20The following specification has been revised to improve compatibility with SDXC reminiscence card format.

The most number of frames that can be recorded in a single folder has been modified from nine,999 to 999.

If you are the use of a macOS laptop to manner recorded documents within the SDXC memory card, make certain to follow the manner under earlier than upgrading the firmware.

Follow the instructions in “II-2. If the use of an SDXC reminiscence card with present documents or one which has now not been these days formatted:” in the article titled “Important note for consumers processing FUJIFILM virtual camera documents the use of macOS” that was published on Feb. 2 in this net site and then layout the SDXC memory card earlier than the usage of it.Minor bugs have been constant.

The firmware replace Ver.2.10 from Ver.2.00 consists of the following troubles:

Regarding the detail, download the “X-S10 New Features Guide[2.10]” from our website.

New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic“instax mini Link” and “instax Link WIDE” may be introduced as relevant printers for X-S10

• The digital camera now supports cellphone printers, “instax mini Link” and “instax Link WIDE” collection.

• Due to the above change, items of the “instax PRINTER PRINT” can be modified inside the playback] menu.

• In addition, the menu name, “instax PRINTER CONNECTION SETTING” can be renamed as “instax PRINTER SETTINGS” in addition to its content material has been modified, which seems through [SETUP MENU] ➔ [CONNECTION SETTING].The electronic stage display will work in wider range of the lean perspective, so you can use the electronic level at the LCD even if you tilt the digicam more than that with the modern-day firmware.Minor bugs were fixed.

The firmware replace Ver.2.00 from Ver.1.04 contains the following problems:

Regarding the element, download the “X-S10 New Features Guide[2.00]” from our internet site.

New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, ArabicSupport for tethered taking pictures

The new firmware adds tethered taking pictures capability, which may be used by connecting the X-S10 to a pc mounted with either “Capture One”*1, “Tether Shooting Plug-in for Adobe® Photoshop® Lightroom®” or “FUJIFILM X Acquire.” The tethered taking pictures function can be used both through the USB cable connection and also wirelessly over a Wi-Fi community.

*1 Today, Capture One isn’t always like minded with the X-S10 tether taking pictures function. The Capture One is to be upgraded. For detail, visit the website under.

     URL: enables far off control capability from gimbal through USB communications

With this firmware replace, combining the X-S10 with a well matched gimbal that helps far flung control capability will permit users to begin / prevent video recording, specify publicity settings for video (shutter velocity, aperture cost, ISO sensitivity and publicity repayment), and make guide recognition modifications. Guilin Zhishen Information Technology Co., Ltd (ZHIYUN) has introduced the purpose of imparting compatible merchandise for the new X-S10 firmware replace.Function-specific locking

The new firmware provides a Lock option to the settings for buttons and dials inside the Setup menu. By allowing the characteristic, the accidental modifications of dial / button settings might be averted.Improvement of shutter velocity putting for TTL gradual sync flash taking pictures

In P and A mode, this firmware makes the slowest shutter speed slower than 1/8 sec. for the taking pictures utilized in a scene wherein exceptionally long publicity is needed (ex. a flash shooting with night view background). In case the shutter speed putting is AUTO, the shutter pace will become max. 4 sec in P mode and max. 30 sec. in A mode.Display of “IP ADDRESS” in Setup Menus > CONNECTION SETTING > INFORMATION is introduced.In case of the usage of the FUJIFILM X Webcam the choice in the menu adjustments from “X WEBCAM” to “USB TETHER SHOOTING AUTO”. Also, the putting screen displayed on a PC can be used. The phenomenon is constant that the placement of the spot metering is constant at the middle with out reflecting the postion of the point of interest location in case the focal point mode is MF and the metering mode the spot.The phenomenon is fixed that an photo can’t be played returned with a exact document call created through the EDIT FILE NAME function.Fix of teenage insects.

The firmware update Ver.1.04 from Ver.1.02/1.03 includes the following troubles:For the case that “AUTO” is chosen by the Mode Dial and a face is detected in a dark surroundings, a putting is modified to keep away from a blur photograph caused by hand shaking and/or moving topics. A digital camera doesn’t apprehend an Apple Silicon Mac via a USB cable.Fix of stripling insects.

The firmware update Ver.1.02 from Ver.1.01 consists of the following problems:In case that AUTO is selected by way of the Mode Dial or AUTO is selected in MIN. SHUTTER SPEED of ISO setting, the shutter pace putting is modified to avoid a blur image resulting from hand shaking and/or shifting subjects. ELECTRONIC LEVEL may be used whilst AUTO is chosen by means of the Mode Dial.Fix of a minor malicious program.

The firmware update Ver.1.01 from Ver.1.00 includes the subsequent problem:The phenomenon is constant that even as the microphone/far off release connector is used, a digicam doesn’t work well in a specific situation. If you operate a microphone or a far off release, make sure to improve the firmware. Firmware Update Steps

  • Check the firmware version.
  • Prepare a formatted reminiscence card.
  • Download the firmware and copy it to the card.
  • Put the memory card with the firmware inside the digital camera and replace it.
  • Detail of firmware update stepsPrecaution

    Leave a Reply

    Your email address will not be published. Required fields are marked *